ST Female to Male and Fixed Fiber Optic Attenuator Singlemode / Multimode
Description:
Fiber Optic Attenuator is a component installed in a fiber optic transmission system that reduces the power in the optical signal. It is often used to limit the optical power received by the photo detector to within the limits of the optical receiver.
Feature:
Low back reflection and Low PDL
High precision attenuation value
Precision control of attenuation range
Wide attenuation range
Precision ceramic ferrule
FC, SC, ST, LC … optional
Plastic or metal housing material
Application:
Testing equipment
Fiber optical CATV
Fiber optical sensor
Fiber optical telecommunication system
Specification:
| Parameters | FC,SC, LC, ST, MU, DIN, MTRJ, Hybrid |
| Attenuation Range | 0dB ~ 30dB |
| Operation Wavelength | SM: 1260-600nm, or 1310nm/1550nm |
| MM:850nm, 1310nm |
| Return Loss | ≤50dB (PC) |
| ≤55dB (UPC) |
| ≤65dB (APC) |
| Attenuation Accuracy | ±0.5dB (1 ~ 10 dB) |
| ±10% of Attenuation Value (11~30 dB) |
| Polarization Dependent Loss (PDL) | ≤0.2dB |
| Exchangeability | ≤0.2dB |
| Repeatability | ≤0.2dB |
| Durability | ≤0.2dB Typical 1000 matings |
| Maximum Optical Input Power | 200mW |
| Operating Temperature | -20 ~ +75°C |
| Storage Temperature | -40 ~ +85°C |
Order Information:
SC/UPC-SM-5dB-Female&Male
Step 1: Connector type: FC, SC, LC, ST, MU
Step 2: Ferrule End-face: PC, UPC, APC
Step 3: Type: Single-mode, Multimode
Step 4: Attenuation: 1-10dB(1dB step), 15, 20, 25, 30dB
Step 5: Mode: Fixed, Female&Male, In-line, Variable
Step 6: Wavelength: 1310nm, 1550nm, 850nm, 1300nm
Product Tags:
|
|
ST Female To Male And Fixed Fiber Optic Attenuator Single Mode Multimode Images
|
